16. When shooting on Hyperfocus mode, one or more images are randomly overexposed
Problem:
We have seen this on both, old and latest version of PackshotCreator software. You will mostly see it
when Hyperfocus mode. Essentially one or more images are randomly overexposed. We have also seen this occur randomly
when taking still photographs. We have found
that in each case the camera had a very high shutter speed and either the
sensor or the shutter were nearing the end of its life.
Solution:
It’s time to get or start using a new camera.
Related Articles
15. Cropping while on Hyperfocus mode - cut off image
Problem: The crop markers were set correctly and did not touch the image, but after shooting on Hyperfocus mode, the final picture was cut off. See below: Solution: The Hyperfocus changes the focal length of the lens, so the object gets slightly ...05. Camera settings
In order to make your camera working in perfect harmony with you software, you will have to do some settings that will never change. For All Canon DSLR Cameras, set: 1. "Auto power off" to Off or Disable 2. "Auto rotate" to Off or Disable 3. Move ...21. When shooting on Hyperfocus mode with PackshotMacro RE and PackshotMacro DIS, some parts of the product are blurry
Problem: If you are working with the PackshotMacro RE or PackshotMacro DIS, you may have some issues when shooting with Hyperfocus. Some parts of your product are blurry and sometimes the stacking is not perfect. Solution: It seems that you are ...01. Canon T2i (550D) supports Hyperfocus only in auto mode, not manual
Originally the T2i (550D) in the old version of PackshotCreator software did not support Hyperfocus for some reason.02. Hyperfocus
Hyperfocus is a function realizing many photos of your products, shifting the focus. It put all the photos together and you get a photo completely sharp. PackshotCreator software offers two different ways to realize Hyperfocus. ● Single-point ...