08. How to adjust my laser
During your PackshotCreator R3
purchase, it's possible to complete your order with a laser
in order to perfectly center your products.
After installing your laser, if it does not exactly shoot the center, you will have to make those manipulations :
● Loosen the screw that holds the patella with an allen key.
● Adjust the laser in order to shooting the center of the turntable.
● Tighten the screw maintaining the laser right position.
22. Cropping issue while shooting with AutoMask
Problem: You need to shoot your product on AutoMask mode with a specific crop frame ratio (for example 1:1 square). After setting up the crop, parts of your machine can be seen inside the crop frame. Then, when trying to adjust the AutoMask mask, the ...
03. Calibrate my turntable
In order to create great and smooth 360 or 3D animations, your turntable will have to be correctly calibrated. Generally, it is originally calibrated, but maybe you will have to do it by yourself. Here is the handling: ● Click on the main menu on ...
05. The software doesn't detect the PackshotCreator R3 turntable
This article is only for the PackshotCreator R3 systems. If you launch the software and you can't access to the 360 or 3D mode, your turntable is maybe not detected by the software. It happens sometimes: the turntable has moved from its original ...
Hyperfocus is a function realizing many photos of your products, shifting the focus. It put all the photos together and you get a photo completely sharp. PackshotCreator software offers two different ways to realize Hyperfocus. ● Single-point ...
PackshotCreator - OrteryCapture Step 1. Install the extension Enter Magento Connect Manager Upload the extension from local disk Refresh data Step 2. Extension setting Login in admin panel in your Magento website, then enter system -> configuration, ...